30 inch bathroom vanities

Start with the count: 10 vanities at 30 inches

This store carries 10 bathroom vanities sized at 30 inches, priced from $251.91 to $509.84. That is the whole set the guide draws on, so treat every figure below as a description of those 10 products rather than of the category at large.

A 30 inch vanity is a compact unit, and the width usually leaves room for a single basin with storage beside or beneath it. Measure the wall run first, then check the depth of the unit against the swing of the door or drawer fronts. In a small bathroom, the gap between the vanity edge and a shower or toilet matters as much as the width itself. Leave enough floor space to stand and turn.

What is in stock right now

Of the 10 vanities, 6 are listed with storage and 6 with a drawer, so drawer storage is the most common arrangement in this set. Two are wall-mount, 2 are described as floating, 1 has a shelf and 1 lists soft-close hardware. Two products are wood, and 2 sit in the second price tier. The remaining products do not carry those specific labels in the data.

Six of the 10 have a stated 30 inch dimension, so the count of 10 includes units whose width is given in the title but not repeated in the dimension field. Read the product page for the exact width before you commit to a fit. The price range runs from $251.91 to $509.84, which is a wide spread for the same nominal size.

Measure the wall run before anything else

A 30 inch vanity needs a clear run of at least 30 inches, plus a little tolerance for skirting, tile edges and uneven walls. Measure at the height where the vanity will sit, not just at the floor, because plaster and tile can bow. Note where the waste pipe and supply lines emerge, since a drawer stack may foul them.

Check the door swing and the drawer pull-out against nearby fixtures. A wall-mount or floating unit frees the floor beneath it, which can make a tight room feel less crowded, but it needs a wall that can take the load. A freestanding unit spreads its weight on the floor and is simpler to install. Neither is better in the abstract; the wall and the plumbing decide.

Storage layouts in this range

Six of the 10 vanities list storage, and 6 list a drawer. Some combine doors with a drawer, and one title mentions two drawers plus a tip-out drawer. A tip-out drawer is shallow and suits small items; a full drawer takes bottles and towels. One product lists a shelf, which gives open storage rather than closed.

Think about what you actually keep at the basin: daily items want a drawer at hand, bulk supplies can go behind a door. If the vanity is wall-hung, the space below can hold a basket, which adds storage without adding width. Count the doors and drawers on the product page rather than assuming from the title, because the same phrase can describe different internal layouts.

Materials and finishes named in the data

Two of the 10 vanities are wood. Other titles mention MDF board, plywood and a solid frame, and one describes a solid wood frame. These are the material words that appear in the product data, and they are not interchangeable: a solid frame with MDF panels is a different build from an all-wood carcass.

Finish colours in the set include white, gray, green, light green and a walnut woodgrain. Colour is a visual choice, but it also affects how a small room reads. A pale unit tends to recede; a dark or woodgrain unit reads as a solid block. Whichever you pick, check that the finish is described for the cabinet and the basin separately, since they can differ.

Basins, tops and what is not included

The vanities in this set are described with ceramic basins, including round, black and white options, and one lists an undermount sink. Several titles state that the basin comes without a faucet, and one says without a drain and faucet. Read that line carefully: a vanity with no faucet needs one bought separately, and the tap holes in the top must match.

Some units are sold as a combo with the top and sink included, while others are cabinet only in the wording. Check whether the top is pre-drilled and how many holes it has. A single-hole top suits a monobloc mixer; a three-hole top suits a mixer with separate handles. The product page is the only reliable place to confirm this.

Wall-mount, floating and freestanding

Two vanities are wall-mount and 2 are floating, which in practice means the same thing: the cabinet hangs on the wall with clear floor beneath. The other units are freestanding, resting on the floor or on legs. Wall-hung models make sweeping the floor easier and can suit a room where the floor is uneven.

Freestanding models are generally simpler to fit and do not depend on wall strength in the same way. If you choose wall-hung, fix into solid structure or use appropriate anchors for the wall type, and allow for the waste pipe running behind the cabinet. Check the height you want the basin at before drilling, because a wall-hung unit can be set at the height that suits the household.

What this guide cannot tell you

Two products described in similar words can still differ in carcass thickness, hinge quality, basin shape and how the top is fixed. This guide reports only the counts and labels in the store data, so it cannot rank one 30 inch vanity above another on build or finish. The individual product page governs every detail.

Where a title and a specification disagree, trust the specification, and ask the seller if the point matters to your installation. Dimensions in particular should be confirmed against the drawing or dimension field rather than the rounded size in the name. Use this page to narrow the field, then read the full listing before you buy.