Backyard storage sheds

Start with the count: 20 backyard storage sheds in stock

This store carries 20 backyard storage sheds, priced from $93.74 to $981.24. That is the whole range, not a filtered selection, and it is the number every claim below refers back to. Ten of the 20 are listed as metal, three as wood, three as steel and one as plastic, which leaves three whose material is not stated in the listing data.

Twelve of the 20 are described with storage as a feature, and three are described as lockable. Only one product in the range carries a stated dimension value in inches, at 87.8 in, so dimension coverage sits at 1 of 20. Treat footprint as something you confirm on the individual product page rather than something this guide can compare across the range.

Match the shed to what you are storing

Work backwards from the contents. Bikes, mowers and long-handled tools need a floor area you can walk into with the door open, while a shed used for hand tools, pots and a folded chair can be much smaller. The listings here name bikes, tools, lawn mowers and gardening tools as intended contents, so use those as your starting categories and add anything else you own.

Height matters as much as floor area. A ride-on mower or a tall shelving unit needs clear internal height, and a lean-to design trades height at the back for a lower profile against a fence. Write your list before you compare anything, then check each candidate against it. A shed that fits the list is worth more than one that merely fits the gap.

Measure the wall run first

Measure the wall run, the gate width and the route from the street before you look at any product. A shed has to pass through whatever gap exists between the front of the property and its final position, and a panel that will not fit through the gate is a problem no amount of internal space solves. Note the position of downpipes, drains, windows and outdoor taps along the intended wall.

Leave working room around the shed for assembly and for opening doors. Sliding doors need clear travel along the face of the shed; hinged doors need an arc in front. Check the height of any fence, overhang or branch above the chosen spot. Only one product in this range states a dimension value in inches, so for the other 19 you will need to read the individual product page for the footprint and confirm it against your measurements.

What is in stock right now

The current range is 20 products. By material, 10 are metal, three are wood, three are steel and one is plastic; the remaining three do not state a material in the listing data. By feature, 12 are described as storage and three as lockable. Prices run from $93.74 at the low end to $981.24 at the high end.

Those counts refer to the 20 matched products in this store's range, not to a wider catalogue. The titles also show a spread of formats: double sliding doors, three lockable doors, a clear window, four air vents, and a lean-to shape. One listing is a bike storage tent rather than a rigid shed, and one notes that non-defective remorse returns are not supported, so read the returns terms before ordering.

Metal, wood, steel and plastic compared

Metal is the largest group here at 10 of 20, with steel listed separately on three more. Both are commonly chosen where low maintenance and resistance to rot matter, and both can be noisy in heavy rain and hot in direct sun. Wood, at three products, is the group most often associated with a traditional appearance and with the option to repaint or stain later, though it generally asks for more upkeep.

Plastic appears once in this range. It is usually the lightest option and the easiest to hose down, but it can discolour over time and may need a firm, level base to stop panels flexing. None of these are universal rules, and the material named in a listing is the only material claim you can rely on for that product. Check the individual page for thickness, coating and fixings.

Lockable doors, vents and windows

Three of the 20 products are described as lockable. A lockable door is a deterrent rather than a guarantee, so pair it with a shed that sits within sight of the house and keep high-value items out of it. If you plan to store anything you would not want taken, check how the door closes and whether the frame around the lock is reinforced.

Ventilation appears in the titles as four air vents on more than one model, and one product lists a clear window. Vents reduce condensation and stale air, which matters if you store textiles, paper or anything that rusts. A window adds light but also a view in from outside. Decide which of the two you actually need before comparing prices, because both change how the shed performs day to day.

Base, drainage and anchoring

Every shed in this range needs a flat, level base. A paved slab, a timber frame or a proprietary base all work if they are solid and stay put; bare soil does not, because it moves and holds moisture. Set the base slightly above the surrounding ground so water runs away from the shed rather than under it.

Anchoring matters most for the lighter units. Metal and plastic sheds can lift in strong wind, so fix the base to the ground and the shed to the base using the fixings the product specifies. Keep the shed clear of the damp course of the house and leave a gap behind it for air to move. Check local rules on permitted development and on how close a structure may sit to a boundary before you commit to a position.

Limits of this guide

Two products described in the same words can still differ. Material names, door types and feature labels in this guide come from listing data, and listings do not capture every difference: gauge, coating, panel thickness, fixings and warranty terms can all vary between products that read alike. The individual product page governs in every case.

Only one product in this range states a dimension value in inches, so this guide cannot compare footprints across the range and does not try to. Prices and stock change, and the counts above describe the range at the time of writing. Use this page to narrow the field, then confirm measurements, materials, fixings and returns terms on the product page before you order.