TV stand with shelves

What you can buy right now

There are 19 TV stands with shelves in stock. The material mix is 6 wood, 1 fabric, 1 glass and 1 bamboo. The feature mix is 13 with a shelf, 7 with storage, 4 floating, 3 wall-mount and 2 with a drawer. Prices run from $36.84 to $266.31. Seven of the 19 have a published width, and those widths are 45.0, 53.1, 55.0, 60.0, 70.0 and 88.0 inches. Two models have five tiers. The counts above refer to the 19 matched products, not to every TV stand the store has ever listed.

Measure the wall run first

Before you compare any stand, measure the wall run you intend to use and write the number down. A stand that is too wide will crowd a doorway or block a radiator; one that is too narrow leaves the screen looking unsupported. Leave at least a hand's width of clearance on each side of the TV so cables and speakers are not pinched. If you are wall-mounting, check that the wall is flat and that you can reach a stud or suitable fixing. The published widths in this range start at 45.0 inches and go up to 88.0 inches, so there is a size for most rooms, but only 7 of the 19 products list a width at all. For the rest, treat the product page as the only reliable source.

Match the stand to the screen size

Screen size and stand size are not the same thing. A stand rated for a 65 inch screen can still be shorter than the screen is wide, because the rating refers to the diagonal, not the width. Check the VESA pattern if you plan to mount the TV on the stand's own bracket, and check the stand's top surface if you plan to rest the TV on its own feet. The titles in this range mention ratings for 45, 55, 60, 65, 70 and 88 inch screens. That spread covers small bedrooms and large living rooms, but it does not tell you the stand's own footprint. Read the dimensions on the product page before you commit.

Open shelves, closed storage and drawers

Open shelves keep a media player, router or games console visible and ventilated. Closed storage hides remotes, cables and children's toys, but it can trap heat, so leave a gap at the back if you put electronics inside. Drawers suit small items that would otherwise clutter the top surface. In this range, 13 products have a shelf, 7 have storage, 2 have a drawer, 4 are floating and 3 are wall-mount. Those categories overlap, so a single stand can appear in more than one count. Decide which of the three jobs matters most in your room, then filter on that feature rather than on the total number of shelves.

Floating and wall-mounted options

A floating stand fixes to the wall and leaves the floor clear, which makes a small room feel less crowded and makes sweeping easier. It also puts the weight of the TV and the stand onto the wall, so the fixing matters more than the finish. Check what the wall is made of, and use a fixing rated for the combined load. Four products here are described as floating and 3 as wall-mount; some may be both. Floating designs usually have less internal depth than a floor-standing console, so measure your largest device before you buy. If you rent, confirm that wall fixings are allowed before you drill.

Materials and finish

Wood, wood composite, particle board, glass and bamboo all appear in this range. Wood and bamboo suit a warm, natural room; glass and high-gloss finishes reflect light and can make a dark corner feel brighter. Particle board and wood composite are common in lower-priced stands and are usually finished with a veneer or foil, so the surface you see is not the material underneath. Wipe a sample of the finish if you can, and check whether the edges are sealed. In this range the material mix is 6 wood, 1 fabric, 1 glass and 1 bamboo, with the remainder not specified in the titles. Treat the product page as the authority on what a given stand is made from.

Cable management and ventilation

Plan the cable route before the stand arrives. A cable hole or a gap at the back lets you push power, HDMI and aerial leads out of sight, and it keeps them away from the heat that builds up around a receiver or console. Leave at least a few centimetres of air space around any device that runs warm, and avoid stacking devices directly on top of each other. If the stand has a closed cabinet, check whether the back panel is solid or vented. None of the counts here tell you how a specific stand handles cables, so read the product description and look at the images for a cut-out or a rear gap.

What this guide cannot tell you

Two products can be described in the same words and still differ in board thickness, edge finish, fixing hardware and assembly. The counts and measurements above come from the store's own listings, and 12 of the 19 products do not publish a width at all. Where a number is missing, this guide does not guess it. The individual product page governs: it carries the current price, the current dimensions, the current material and the current stock status. Use this guide to narrow the field, then open the product page and check the details that matter for your room before you order.